Which xTool should I buy?

It depends on the material more than the budget. Metals — precious or stainless — need an infrared source — the xTool F2 (5 W infrared, 1064 nm, plus 15 W diode) or the F2 Ultra Dual (60 W MOPA fibre plus 40 W diode). Cutting wood and acrylic needs a CO₂ machine such as the P3. Glass, plastics and heat-sensitive items suit the low-heat-input F2 Ultra UV. Full-colour artwork printed straight onto objects is a job for the O1 Omni Dual UV printer rather than a laser. Use the recommender on this page for a starting point, then confirm it with a studio demonstration in Dunshaughlin.

Can a single xTool do metal marking and sheet cutting?

No. Fibre lasers mark metal and CO₂ lasers cut timber and acrylic; they are different sources doing different jobs. If you need both, plan for two machines and decide which side of the work pays for itself first.

Do you sell xTool machines?

We don't hold stock or process payment ourselves, but as an xTool partner studio we can place the order with xTool on your behalf after a consultation or demo. xTool emails you directly with the order summary and payment request, so you purchase from xTool directly while skipping the self-service cart and search process.

Who is consultation for?

Buyers, makers and small businesses who want to choose the right xTool setup before spending money.

What does the consultation cover?

Use case fit, materials, workspace, ventilation basics, budget realism and which machine configuration best suits your goals.

Initial 30-minute discovery calls are complimentary. Longer sessions are quoted based on scope.

xTool consultation

Choose the right xTool setup before you buy.

Independent buying advice for people who want practical answers before they commit budget. We focus on what you need to make, what your workspace allows, and what setup is realistic.

The aim is simple: avoid the wrong machine purchase, avoid common setup issues, and move into commissioning with a clearer plan.

Book a Consultation Which xTool suits me?

Based in Co. Meath
Talk it through with the people who run these machines daily.
Buying advice before purchase
Clarify machine fit before you spend.
Setup-aware recommendations
Plan for workspace, extraction and workflow needs.
Working studio context
Guidance informed by day-to-day practical use.

Which xTool suits your work?

Five quick questions. You get a suggested machine, the reasoning behind it, and the honest limits — the same starting point we would give you on a call.

1.What do you mainly want to make?

2.Which materials will you work with?

Pick everything that applies.

3.How big is your largest piece?

4.How much will you run it?

5.Where will it live?

Answer all five questions and a suggested setup appears here, with its limits stated plainly.

Who it's for

First-time xTool buyers who want to avoid the wrong machine.
Small businesses planning new personalised products.
Makers comparing machine options against real material needs.

What it helps you decide

Which xTool machine and configuration fit your use case.
Which materials and finishes are realistic for your goals.
What to budget for accessories, extraction and setup workflow.

What you get from the consultation

30-minute discovery call to scope your needs.
Optional in-studio demo on relevant sample materials.
Clear next-step recommendation for buying and setup.

What to bring to the call

What products you plan to make and expected volumes.
Material list, finish expectations and key quality requirements.
Workspace notes: power, ventilation and practical constraints.
Budget range and timeline for purchase and setup.

If you already own a machine and need help getting it running safely, setup and commissioning guidance is usually the better first step.

Frequently asked

Which xTool should I buy?: It depends on the material more than the budget. Metals — precious or stainless — need an infrared source — the xTool F2 (5 W infrared, 1064 nm, plus 15 W diode) or the F2 Ultra Dual (60 W MOPA fibre plus 40 W diode). Cutting wood and acrylic needs a CO₂ machine such as the P3. Glass, plastics and heat-sensitive items suit the low-heat-input F2 Ultra UV. Full-colour artwork printed straight onto objects is a job for the O1 Omni Dual UV printer rather than a laser. Use the recommender on this page for a starting point, then confirm it with a studio demonstration in Dunshaughlin.
Can a single xTool do metal marking and sheet cutting?: No. Fibre lasers mark metal and CO₂ lasers cut timber and acrylic; they are different sources doing different jobs. If you need both, plan for two machines and decide which side of the work pays for itself first.
Do you sell xTool machines?: We don't hold stock or process payment ourselves, but as an xTool partner studio we can place the order with xTool on your behalf after a consultation or demo. xTool emails you directly with the order summary and payment request, so you purchase from xTool directly while skipping the self-service cart and search process.
Who is consultation for?: Buyers, makers and small businesses who want to choose the right xTool setup before spending money.
What does the consultation cover?: Use case fit, materials, workspace, ventilation basics, budget realism and which machine configuration best suits your goals.
Is the call free?: Initial 30-minute discovery calls are complimentary. Longer sessions are quoted based on scope.

Want to pre-read before we talk? See the per-machine xTool reviews, the jewellers' buyer guide, or browse the full range on xTool's EU store.

Book your xTool buying consultation.

Share your use case, materials and budget range. We will help you choose the right setup before you buy.

Book a Consultation See commissioning support

Call Request a Quote

xTool Ireland

Buying an xTool in Ireland

In-person demos, better-than-direct pricing and local support from Ireland's first xTool Pro Hub.

Buyer guide

Best xTool for jewellers

Which xTool actually fits a jewellery bench — low-heat-input marking, fine detail, precious metals.

Buyer guide

Best xTool for signage workshops

P2S versus P3 on bed size, throughput and pass-through — the CO₂ that saves time on larger panel work.

Journal

Are laser engravers worth it? A studio owner's honest answer

We operate multiple xTool laser systems commercially across infrared, fibre, diode, UV and CO₂ workflows. Here's the unvarnished version of what payback looks like — and the four questions that tell you if a laser pays for itself in your business.